Our Acoustic Textile is been Tested in accordance with AS/NZS 3837-1998
Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter

Acoustic Textile

Products Group number Classification : 1

End use: Architectural Applications

Nominal Composition: 100% Polyester

Nominal Mass per Unit Area/Density: 140g/m2

Nominal Thickness: 0.37mm

Key Product Attributes

- NRC≥0.70 for most commonly used perforated patterns - Unique & adequate solution for most acoustic installations.

- Fixed in place and not floating

- No synthetic mineral fibres

- Can be used in all building applications

- Low installed cost

- Fully recyclable

- Clean, light and safe to handle

- Non-toxic and safe to handle without PPE or respiration apparatus.

- When using spray adhesive please refer to the safety recommendations to the product used.

- Rolls must be transported and stored vertically.

- Architectural Acoustic Wall treatments

- Classrooms and lecture theatres

- Offices and reception areas

- Restaurants and clubs

- Swimming pool banners

- Easy Installation

- Lightweight

- Excellent Mechanical Properties.

Benefits

Health & Safety

Shelf Life & Storage Conditions

Typical Applications

Product Description

The Acoustic TexTile  is a Non-Woven Acoustic Textile, selected to provide excellent mechanical strength, reduced translucency and good permeability. ACOUSTIC Textile ®  is predominantly designed for installation behind perforated panels to provide a good sound absorption, elegant appearance and to prevent fibre release from bulk materials like polyester blanket, Rockwool or fiberglass, which might be used for further boosting of the acoustic properties. Acoustic Textile  does not have a heat reactive adhesive coating, hence requires a spray adhesive in order to bond to the panels.